There are many devices that microphones can connect to, including: Although microphones can technically be connected to any audio input provided they have the correct connectors, this article will focus on mic inputs. This connection is always made via a microphone input. These are the four steps that this article will concentrate on.Ī microphone can technically be used by itself, but it is best to connect it with a device that will use its output signal.
Connecting mic preamp to audio interface how to#
These four steps will enable you to use any microphone or at least how to use it. The 4 key actions to use a microphone are, in simple terms: This is why condenser microphones require Phantom power or another external power source such as a battery or power supply. The transducer allows the diaphragm to vibrate closer to a charged metal plate. However, you could damage the tube or larger diaphragm if you record too loud or drop it. This is why they are preferred in studios where the acoustic environment has been tightly controlled. They can sense subtle changes in volume and are sensitive to small changes. These mics are aimed directly at the sound source. These mics are what you will find in recording studios. It works differently in a condenser microphone, which is what makes them unique. This entire system is known as a transducer. In dynamic mics, it moves a magnet through the magnetic field of a wire coil. The diaphragm vibrates when sound pressures are applied to it. They can handle louder sounds because they are less sensitive to volume and damage. The dynamic mics you will see most often on stage have the sound directed down the front of it. However, most hobbyists and recording engineers only use the two below types. There are many types of microphones available, including shotgun mics and boundary mics. There will also be many that differ from each other. You’ll find both long and shortlists of microphone types if you search for them.